| MNP1095 ERP Specification | ||
| Item | Description | Specification |
| 1 | product type and category as defined in Article 2 (one and only one category) | Magic Note Pad |
| 2 | manufacturer's name, registered trade name or registered trade mark, and the address at which they can be contacted; | Hanvon Ugee Technology Co., Ltd. Trade name: XPPen 2/F, West of 3/F, 4/F, No.4 Building, Fulongte Industrial Park, Huaxing Road,Langkou Community, Dalang Street, Longhua District, Shenzhen, China |
| 3 | product model number, | MNP1095 |
| 4 | year of manufacture, | 2025 |
| 5 | ETEC value (kWh) and capability adjustments applied when all discrete graphics cards (dGfx) are disabled and if the system is tested with switchable graphics mode with UMA driving the display, | / |
| 6 | ETEC value (kWh) and capability adjustments applied when all discrete graphics cards (dGfx) are enabled; | / |
| 7 | idle state power demand (Watts); | / |
| 8 | sleep mode power demand (Watts); | 0.02408 |
| 9 | sleep mode with WOL enabled power demand (Watts) (where enabled); | 0.14 |
| 10 | off mode power demand (Watts); | 0.00038 |
| 11 | off mode with WOL enabled power demand (Watts) (where enabled); | / |
| 12 | internal power supply efficiency at 10 %, 20 %, 50 % and 100 % of rated output power; | / |
| 13 | external power supply efficiency; | above 80% |
| 14 | noise levels (the declared A-weighted sound power level) of the computer, | / |
| 15 | the minimum number of loading cycles that the batteries can with stand (applies only to notebook computers); | 500 cycles |
| 16 | the measurement methodology used to determine information mentioned inpoints (5) to (15); | Use a multimeter to measure the voltage and current before and after the power supply |
| 17 | sequence of steps for achieving a stable condition with respect to power demand, | Firstly,Set up according to the requirements for a stable power consumption state.For example,Idle mode requires enabling airplane mode and waiting for the screen to turn off. Secondly,Waiting for 5 minutes for achieving a stable state. Finaly,testing for 10 minutes and averaging |
| 18 | description of how sleep and/or off mode was selected or programmed, | Sleep mode:waiting the screen off without any intervention or press the power key once. Off mode:Press and hold the power key until the prompt box appears, then select "Power Off" |